BALUN 2:1 - LOW POWER&QRP

0.5 kW max

Questo BALUN 2:1 svolge la funzione di trasformazione di impedenza del valore di 110 (112,5) Ohm su 50 Ohm. E' del tipo "serie" e si compone del circuito trasformatore vero e proprio (ferrite alta) e di un blocco RF a valle (ferrite bassa). E' indicato per potenze non superiori a 500 Watts SSB con valori di ROS non superiori a 1,3:1. Per utilizzo in CW/DIGImodes occorre ridurre adeguatamente la potenza in uso.

E' indicato per impieghi sia portatili che per installazioni fisse e l'attacco a palo (in dotazione) accomoda diametri da mm 30,00 a mm 50,00.

Si utilizza per adattare antenne di tipo LOOP (Quad - Delta - ecc...) e Dipoli aventi un valore di impedenza ricollocabile nei 100 Ohm medi.

La piastrina di Policarbonato è trattata UV.

In questo caso le ferriti sono di tipo FT150A-K; la circuitazione è assemblata con Rame Argentato ricoperto Teflon e cavo coassiale RG 188 A-U.

I pins di collegamento sono di acciaio inox.

Larga banda da 1.8 a 29 MHz.

 

 

This BALUN 2:1 is indicate for power not exeeding 500 Watts SSB, with a value of VSWR less than 1,3:1. For higher levels (VSWR) or use in CW/DIGImodes needs adequately reduce the transmission power.

The BALUN is designed for portable and/or fixed installations and the clamp for mast (supplied) is useful for diameters ranging from mm 30,00 to mm 50,00. The Polycarbonate plate is UV treated.

The BALUN is the "series" type: the upper ferrite performs the function of processing, while the lower ferrite is an RF Choke.

It is used for LOOP antennas (Quad - Delta - etc....) and Dipoles with a characteristic impedance of the average value of 100 Ohm.

In this case the ferrites are FT150A-K; the circuit is made with silver-plated copper wire - Teflon covered; the coaxial cable is RG 188 A-U. The connecting bolts are stainless-steel.

Wide band from 1.8 to 29 MHz.

 

 

 

BALUN 2:1 - MEDIUM/HIGH POWER

2,5 kW max

Stesse caratteristiche di cui sopra ad eccezione del livello di potenza ammissibile non superiore a 2,5 kW SSB.

La ferrite è FT240-K.

Larga banda da 1.8 a 29 MHz.

 

Apply the same directions above except that the maximum power handling is 2,5 kW SSB.

The ferrite is FT240-K.

Wide band from 1.8 to 29 MHz.

Delta FASTLOOP W.A.R.C.

30 meters

....../p - Alta Valsassina

prove in 6 metri

6 meters 2 elements

Delta

FWD 10-15-20 s 

Free Wire Delta

(the 20 meters band is a shortened loop by an inductive load - flattop)

...low-bands...

and so on....